Rimage DLN5200 Podręcznik Użytkownika Pobierz pdf (Strona 18)

Maintain the DLN5200/DL5200

5. If necessary, perform a front to back

alignment.

a. Turn the front to back alignment

screw until there is a 1/16” (1.5mm)

gap between the front edge of the

disc and the raised edge of the disc

retainer.

# Tip: You can use the Torx T25

driver, or 5/32” Allen wrench, to

turn the front to back alignment

screw.

b. When the printer is aligned, rotate

the lead screw to raise the lift arm

up about 1.0” (2.5 cm).

Disc Retainer

6. Exit the diagnostic test.

Gap Distance

Lift Arm

Pad

Lead

Screw

a. Press and hold the operator button to exit diagnostic test 4. The disc is lifted up to the

top output tray and released.

b. Press the operator button fourteen times and hold on the last press to exit diagnostics.

c. Press the operator button one time to close the printer tray.

110768_E 13

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Brak uwag

Rimage DLN5200 Podręcznik Użytkownika Strona 18